BIGTREETECH 3D Printer Stepstick Mute TMC2208 V3.0 UART Mode Stepper Motor Driver with Heatsink Printer Control Board(4 PCS)

IQD 35,000
IQD 77,250
-56%
zoodmapy دفعة
IQD 8,750.00 4 دفعات
الدفع بالأقساط متاح برسوم فائدة 0%
التقييمات:
 0
/5 (0  التقييمات)

الشحن مجاني مِن الصين

Shipping FeeIcon رسوم الشحن   مجّاني

Home DeliveryIcon تسليم الى العنوان -   عبْر - ZMC

Main Color:
الكميّة:
في المخزن
إدفع في 4 أقساط بدون فوائد
بواسطة QiCard
بواسطة اي بطاقة ائتمان
اونلاين مع زين كاش
نقدا عند التسليم
0
0 التقييمات
[Good heat dissipation]Large heat dissipation area, good heat dissipation effect. Configuration:UART microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3.3-5V Motor Voltage : 4.75-36V Motor Phase Current: 1.2A RMS, 2.0A Peak
[Potentiometer adjustment instruction] The range of Vref value: default value: 1V (+0.2); MAX: 2V; MIN: 0V; Clockwise: Reduce Vref Counter-clockwise: increase driver current
Working Mode: Dir Step
Microplver: 1/256
Microplyer Mode: Up to 256

Driver Current: Up to 2A
Input Voltage: 4.75-35VDC
Logical Voltage: 3.3V-5V
Decibel: Less than10dB
RDSON: less than equal 0.3Q
Motor Phase Current: 1.2A RMS, 2.0A Peak
Brand: BIGTREETECH
Model: TMC2208 V3.0
Type: Stepper Motor Driver
Specification: UART mode
Purpose: 3D printer
Colour:Black+blue
Random cable color
Material: PCB

Package Contents:
4 x TMC2208 v 3.0 stepper motor driver
4 x radiator
1 set x wiring
[Note:] ---Be careful to see the direction of the drive when the driver is inserted into the motherboard --- Do good work before driving heat dissipation work (heat sink + fan) --- Pay attention to the line sequence and IO port when wiring. If the wrong line is connected, the drive will not work. ---- When inserting drive into the main board, pay attention to see the direction of drive, can not insert backward, to prevent drive from burning.

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.