K220+R502-A DC10-24V Two Relay Output with Administrator/User Fingerprint Access Control Board 0.5S-60S- Relay

IQD 53,750
IQD 119,750
-56%
zoodmapy دفعة
IQD 13,437.50 4 دفعات
الدفع بالأقساط متاح برسوم فائدة 0%

الشحن مجاني مِن الصين

Shipping FeeIcon رسوم الشحن   مجّاني

Home DeliveryIcon تسليم الى العنوان -   عبْر - ZMC

Main Color:
الكميّة:
في المخزن
4 أقساط بدون فوائد
بواسطة QiCard
بواسطة اي بطاقة ائتمان
اونلاين مع زين كاش
نقدا عند التسليم
0
0 التقييمات
Model Number: K220+R502-A
Power supply: DC10V--24V
Stand-by mode current: less than 10mA
Fingerprint capacity: 200
Output: Relay(Max. current: 10A)

Model: K220
Relay Time: 0.5s-60s or over 60s - In normally open mode-press finger-relay open,press again-relay closed
Note:
1. All indicator lights are off in standby state, and the lights are on in working state;
2.If want to close the module indicator light when in the normally open mode, long press any SET button to hear long "Di" beep three times. Repeat this action to open.
Model: R502-A
Type: Capacitive Fingerprint Module
Interface: UART(TTL)
Resolution: 508 DPI
Sensing array: 192 x 192 pixel
Standby current: Typical contact standby voltage: 3.3V, Average current: 2uA
Fingerprint module external size: Diameter 22 (mm)
Fingerprint module inner size: Diameter 19.3 (mm)
Fingerprint module height: 5 (mm)(Except the connector)
Effective collection area: Diameter 15.5 (mm)
Connector: MX1.0-6Pin
LED Control: YES
Scanning Speed: less than 0.2 second
Verification Speed: less than 0.3 second
Matching Method: 1:1; 1:N
FRR: less than equal 1%
FAR: less than equal 0.001%
Work environment: -20Celsius ---600Celsius
Work Humidity: 10-85%
Anti-static capacity: 15KV
Abrasive resistance intensity: 1 million times
Communications baud rate (UART): (9600 x N) bps where N = 1 - 12(default N = 6, ie 57600bps)
colour:Silver
Material:metal

Package Contents:
1 x Fingerprint Access Control Board

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.